Key Specifications

• Running (drop) distance / travel length: 2.0 metres. C-Lite+2C-Lite+2

• Load capacity (maximum supported projector + mount weight): 25 kg. C-Lite

• Product dimensions (when retracted): 450 × 460 × 340 mm (W × D × H) as listed in one spec. C-Lite

• Mechanism: Described as “3-side scissor” style (“3 Side Sessior” as per listing) with cable management and projector adjustment lever. C-Lite

📝 Additional Notes & What to Verify

• The specification list is somewhat minimal on the site (e.g., motor type, speed, noise level, ceiling opening size, wiring/cable management details).

• Ceiling retracted height: The spec gives 340 mm retracted height (height of unit when fully retracted) which is helpful for planning ceiling void. Please verify exactly how much space above ceiling required.

• Mounting footprint: W × D is 450 × 460 mm — you’ll need to check your ceiling slab/false-ceiling and structural support can accommodate this footprint plus dynamic load.

• Motor / drive details: Not specified in publicly visible spec — you should ask vendor for motor type, speed of travel (seconds to drop / lift), noise level (dB), and power supply (voltage/current) — especially important in meeting/boardroom environment.

• Cable management system: The listing mentions “cable management” but details are missing (e.g., how many cables, cable bundles, whether a cable chain or similar is provided). For integration with projector, HDMI, network, power etc, this is important.

• Safety features: Check for limit switches, emergency stop, overload protection, safety screws (or similar) to prevent over-travel, ensure safe installation over a drop of 2 m.

• Finish & aesthetics: For a board/meeting room in Bengaluru, you’ll want to check enclosure cover, ceiling finishing trim, how flush it is with ceiling when retracted, noise/vibration during operation.

• Installation & servicing: Because the spec is for 25 kg load and 2 m drop, ensure your local installer (in Bengaluru) is aware and able to install, align and maintain the unit; check warranty, spares availability.

• Electrical compatibility: Check power requirements, whether compatible with Indian mains (230 V/50Hz) and local conditions (voltage fluctuations, etc).

• Lead time & stock: Since the specification is generic on site, confirm lead time, finishing options, installation time, cost of installation, etc.

🎯 My Recommendation for Your Project

Given your likely environment (meeting/boardroom install) and that you are interested in a 2 m drop motorised lift:

• Confirm the required projector + mount weight and ensure it is well under the 25 kg limit (including mount, lens, peripherals).

• Measure the ceiling void height: the retracted unit is ~340 mm high, but you’ll need extra space for fitting, wiring, and ventilation above it.

• Ensure the ceiling structure (slab/false ceiling) can carry dynamic load of moving projection lift + projectors + vibrations.

• Ask vendor for a full datasheet or installation manual (with motor specs, noise, speed, mounting instructions) so you can review integration with AV system, controls, remote, etc.

• If you have stricter requirements (for example heavier projector, quietest motor for boardroom, higher finish), verify whether this 25 kg/2 m unit is sufficient, or you might need a heavier duty version.

• For procurement in Bengaluru: Request vendor quote including installation, controls (remote, switch, integration), and ensure alignment with your AV system (cabling, projector lift sequence, etc).